Hey this site uses Cookies. Using this site assumes you accept our Terms

Etek 4 Paintball Marker

Etek 4 Paintball Marker

Etek 4 - Marker for The Masses

The following features can be found on BOTH Etek4 LT and Etek4 AM models:

NEW One-Piece Body

New 3D machining with sleek lines. The Body has an integrated male FRM the same as Ego11 and Geo2 to accept the SL3 Regulator

NEW SL3 Regulator

Internally and performance-wise, the exact same regulator that can be found The Etek4 now includes its own angled reg swivel... on the Ego11, CSL and Geo2.1. It allows the Etek4 to run with HP, MP or LP tanks without the need to alter settings and inline regulator adjustments. It has a replaceable and reversible main seal as well as self-purging feature to leave the firing chamber de-gassed after tank removal.

NEW Angled Inline Reg Swivel

Similar to those seen on the Geo2.1 and Ego11, the Etek4 now includes its own angled reg swivel.

NEW 2012 OOPS

The new OOPS combines a low profile, ultra-easy on/off/purge function and front-mounted hose exit. As with all Eclipse markers since 2007 the Etek4 utilizes the T-Slot Rail. The Etek4 will also accept a POPS ASA.

NEW Zick2 Rammer Kit

Zick Kit (Zero Kick) The incredibly successful Zick2 kit is now to be found as standard on the Etek4. The Etek4 kit utilizes a unique rammer cap to work with the Etek4 rammer housing.

NEW Shaft4 Etek Barrel

Like the full-fat Shaft4 barrel, the Etek4 barrel utilizes a 2-piece, reverse threaded construction with a longer rear control bore for increased efficiency and consistency. The barrel is internally finished identically to the Geo and Ego Shaft4 barrel but features simplified external machining. The rear bore is honed to 0.693" diameter and both front and backs are compatible with Shaft4 Boost Kits and Tips.

Deftek Offset Feed

Deftek Feed The feed is offset to one side by a small amount. This prevents the balls that tumble into the breech from bouncing excessively and causing breaks and chops.

Cure Bolt

Cure Bolt Again carried over from the Ego range, the Etek4 now has a Cure bolt as standard, as well as a body-contoured cut at the rear so the bolt blends seamlessly into the marker body. The Cure bolt helps the Etek4 to shoot the most fragile of tournament grade paints without worry of breaks due to the bolt clipping paintballs in the feed stack. The Etek4 will accept Cure3+ and Cure4 upgrade bolts.

Direct Mounted Solenoid

The Etek4 Minifold mounts the ever-faithful SMC solenoid directly to the marker body, directly adjacent to the rammer. There is just a single hose taking the LP air from the LPR to the Minifold where it is filtered for added protection against debris.

Adjustable LPR

With the same LPR found on the Ego11 and CSL, the Etek4 offers precise control of LPR pressure, without the risk of accidental over-pressurization of the solenoid or rammer.

Fully Adjustable Trigger

The Trigger rides in a self-lubricating trigger holder that clips neatly into the frame. This, combined with the magnetic trigger return mechanism, creates a smooth, positive trigger feel. It is adjustable for fore and aft stop as well as magnetic return strength.

Break Beam Sensor System (BBSS)

Break Beam Sensor System (BBSS) Using the same components and software as the Ego BBSS system, the Etek4 ensures that the marker excels at preventing chopped balls in the breech. When enabled, the Etek4 will only fire once a ball has loaded into the breech. If the BBSS system sees any kind of fault, the software automatically overrides the system and the marker continues to fire at a greatly reduced rate.

LED Board (3 tru-color LED indicators)

These 3 clever LEDs allow easy programming of all the user definable parameters by greatly simplifying the programming process. The top LED indicates 10s of units, the middle displays 1s and the bottom shows 0.1 increments.

Programmable Firing Modes

Etek4 has user-definable settings for Dwell, Ball-in-Place, Eyes-Off ROF, Capped ROF (un-capped in Semi 1), Debounce, and Firing Mode. As standard the Etek4 has the capability to be set to cover every tourney regulation.

Soft Grips

The Etek4 grips follow the same design as the Geo and Ego grips. Comfortable, slim, grippy and soft.

The Etek4 LT utilizes glass-reinforced impact resistant composite parts for the frame, eye cover, feedtube and OOPS knob. All other materials are the same high grade alloys found in the Geo and Ego range of markers.

The Etek4 AM is of an All Metal construction that replaces all of the above composite parts with machined alloy parts.

Etek 4 Features

Not available.

Etek 4 AM Specifications

Dimensions

Weight1009g/2.22lb (inc Barrel, Battery, Feed Tube, OOPS)
Length537mm (inc Barrel)
Height222mm
Width28.5mm

Materials

Body6061-T6 Aluminium
Barrel6061-T6 Aluminium
Frame6061-T6 Aluminium
Feed6061-T6 Aluminium
Eye Covers6061-T6 Aluminium

Electronics

InterfaceSingle Push Button plus Tourney Lock
Display3 x Tru-Color LED Indicators
Solenoid Voltage9V
Processor Voltage5V
Processor8-Bit 25MHz
Power Supply1 x 9v (PP3) Battery
EportalNot Compatible

Hardware

ASA MountT-slot mounted adjustable rail with OOPS
Trigger MethodsMicro-switch
Trigger MechanismMagnetic return
Trigger PivotPOM Self lubricating bearing surface
Barrel2-Piece Micro Honed Etek4 14.5" length 0.693" Bore (Shaft4 Compatible)
Feed TubeLever operated Clamping Feed

Pneumatics

Operating PrincipleUnder and over Poppet
Solenoid TypeSMC w/custom direct mount manifold
Drive MechanismZick 2 Rammer Kit
Bolt MechanismCure Bolt Kit

Ergonomics

Grip TypeContoured dual density grip
Grip Pitch151.4mm

Firmware

Firing ModesSemi capped & uncapped. Ramping up to 22 BPS
Debounce Modes10 Debounce Modes
DisplaysNone

Etek 4 LT Specifications

Dimensions

Weight974g/2.14lb (inc Barrel, Battery, Feed Tube, OOPS)
Length537mm (inc Barrel)
Height227mm
Width28.5mm

Materials

Body6061-T6 Aluminium
Barrel6061-T6 Aluminium
FrameGlass Reinforced Nylon
FeedGlass Reinforced Nylon
Eye CoversGlass Reinforced Nylon (Some lucky customers may receive AM eye covers!)

Electronics

InterfaceSingle Push Button plus Tourney Lock
Display3 x Tru-Color LED Indicators
Solenoid Voltage9V
Processor Voltage5V
Processor8-Bit 25MHz
Power Supply1 x 9v (PP3) Battery
EportalNot Compatible

Hardware

ASA MountT-slot mounted adjustable rail with OOPS
Trigger MethodsMicro-switch
Trigger MechanismMagnetic return
Trigger PivotPOM Self lubricating bearing surface
Barrel2-Piece Micro Honed Etek4 14.5" length 0.693" Bore (Shaft4 Compatible)
Feed TubeLever operated Clamping Feed

Pneumatics

Operating PrincipleUnder and over Poppet
Solenoid TypeSMC w/custom direct mount manifold
Drive MechanismZick 2 Rammer Kit
Bolt MechanismCure Bolt Kit

Ergonomics

Grip TypeContoured dual density grip
Grip Pitch151.4mm

Firmware

Firing ModesSemi capped & uncapped. Ramping up to 22 BPS
Debounce Modes10 Debounce Modes
DisplaysNone

Etek 4 Video

Problems playing this video? Try Watching here.


Etek 4 Colours

Colours subject to availability. See your Local Eclipse Dealer.
* Images are for illustration purposes only and are subject to manufacturing tolerances so the colours shown may vary from the actual production models.

  • Titan White
    titan-white
  • Black
    black
  • Red/Black
    red
  • Blue/Black
    blue
  • HDE Earth
    hde-earth
  • HDE Forest
    hde-forest

Etek 4 Team Editions

Colours subject to availability. See your Local Eclipse Dealer.
* Images are for illustration purposes only and are subject to manufacturing tolerances so the colours shown may vary from the actual production models.

Not available.